Network Module

Products

Ethernet

Ethernet - Image 1

Product Overview

The SDEE-ETH is a hardware TCP/IP embedded Ethernet controller module designed by our company based on the W5500 chip, providing a simpler internet connectivity solution for motherboards. The module integrates a TCP/IP protocol stack, 10/100 Ethernet MAC and PHY, communicates with an external MCU via a SPI interface, supports high-speed SPI communication up to 80 MHz, and includes Wake-on-LAN (WOL) and power-down modes to reduce system power consumption.

 Embedded hardware TCP/IP protocol stack supporting TCP, UDP, ICMP, IPv4, ARP, IGMP, and PPPoE.

 Embedded 10BaseT/100BaseTX Ethernet PHY supporting auto-negotiation (full-duplex/half-duplex, 10M/100M);

High-speed SPI interface (supports Mode 0/3), up to 80 MHz, guaranteed stable communication at minimum 33.3MHz.

 3 V operating voltage, 5 V I/O tolerance, supports WOL network wake-up and Power Down mode;

Compact, lightweight, and easy to install.

Specifications

Core ChipW5500 Hardware TCP/IP Ethernet Controller
Communication InterfaceSPI (MODE 0/3), up to 80 MHz (guaranteed at 33.3MHz)
Operating Voltage3.3V (2.97V ~ 3.63V), 5V I/O tolerant
Operating Current132mA (100M transmit); 13mA (power-off mode); 65mA (not connected)
Ethernet standards10BaseT / 100BaseTX, with embedded MAC and PHY
TCP/IP ProtocolTCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Socket Count8 independent hardware sockets operating simultaneously
TX/RX bufferInternal 32K memory
Auto-negotiationSupports full-duplex/half-duplex and 10M/100M auto-negotiation
Crystal Oscillator Frequency25MHz (±30 ppm)
LED IndicatorSpeed (SPDLED), Link (LINKLED), Duplex (DUPLED), Activity (ACTLED)
Product Dimensions43mm (L) × 35mm (W) × 35mm (H)
Package Type48-Pin LQFP Lead-Free Package, 7×7mm, 0.5mm Pitch
Operating Temperature-40℃ ~ 85℃
Storage Temperature-65℃ ~ 150℃

Need a custom solution?

We offer custom PCBA solutions tailored to your needs, from schematic design to mass production delivery.

Consult Custom Solutions